International Journal of Textile Engineering and Management

Repetitive Upcycling of Waste Flax Fibre: A Circular Economy and Sustainability Approach in Yarn Manufacturing

Khen Maung, Mohammad Ali, Md. Musa Miah

First published: April 15, 2025

The study successfully revealed a process waste management technique to develop a circular economy with industrial-scale economic benefits by turning low-value fibre waste into valuable yarns.

Abstract

|

Full text

|

PDF

|

Reduction of Non-Productive Time in Apparel Manufacturing: A Garment Factory Case

Rimsa Taimy, Shafiullah Khan

First published: March 30, 2025

DOI: https://doi.org/10.63261/ijtem116

The study highlights the importance of precise time measurements and workflow analysis in identifying and eliminating non-productive time in garment manufacturing.

Abstract

|

Full text

|

PDF

|

Prediction of Bursting Strength and Pilling Rating of Three Thread Fleece Fabric Using Artificial Neural Network

First published: December 30, 2024

DOI: https://doi.org/10.63261/ijtem115

Figure of Training error curve (MAE) of BP Model for Bursting Strength of three thread Fleece Fabric with varying Stitch length, Grams per square meter (GSM), yarn counts and twist per inch.

Abstract

|

Full text

|

PDF

|

Effect of Acid Wash on Appearance and Physical Properties of Terry and Interlock Knitted Dyed Garment

First published: December 27, 2024

DOI: https://doi.org/10.63261/ijtem114

Color change of garments before and after Acid wash Garments of two kinds, a terry (100% cotton), and an interlock (100% cotton).

Abstract

|

Full text

|

PDF

|

Dye Extraction from Mango Peel and Dyeing of Cotton, CVC and Viscose Fabric Using Extracted Mango Peel Dye and Natural Mordant

First published: December 24, 2024

DOI: https://doi.org/10.63261/ijtem113

Image of the extracted natural dyes from mango peel and apply them on three different fabrics (cotton, Chief Value Cotton, Viscose) to compare which fabric is more suitable for Tannin mordant.

Abstract

|

Full text

|

PDF

|

Mechanical Characterization of Jute/Epoxy Symmetric Cross-ply Composite Laminate

First published: December 23, 2024

DOI: https://doi.org/10.63261/ijtem112

Illustration of the Composite Preparation, Frame Preparation (a), Jute Fibre Layers (b), Resin Application (c), Final Composite (d).

Abstract

|

Full text

|

PDF

|

Power Consumption of Ring Spinning Frame Using Plastic T-in Cylinder

First published: November 07, 2024

DOI: https://doi.org/10.63261/ijmet111

Graph showing power consumption of Ring Frame against the controlled pattern of spindle speed.

Abstract

|

Full text

|

PDF

|

Repetitive Upcycling of Waste Flax Fibre: A Circular Economy and Sustainability Approach in Yarn Manufacturing

Reduction of Non-Productive Time in Apparel Manufacturing: A Garment Factory Case

Prediction of Bursting Strength and Pilling Rating of Three Thread Fleece Fabric Using Artificial Neural Network

Effect of Acid Wash on Appearance and Physical Properties of Terry and Interlock Knitted Dyed Garment

Dye Extraction from Mango Peel and Dyeing of Cotton, CVC and Viscose Fabric Using Extracted Mango Peel Dye and Natural Mordant

Mechanical Characterization of Jute/Epoxy Symmetric Cross-ply Composite Laminate

Power Consumption of Ring Spinning Frame Using Plastic T-in Cylinder