Prof. Dr. Mohammad Ali

Academic Editorial Board

Prof. Dr. Ummul Khair Fatema Department of Environmental Science and Engineering, Bangladesh University of Textiles.	Prof. Dr. Shahjalal Khandaker Department of Textile Engineering, Dhaka University of Engineering and Technology, Bangladesh.
Prof. Dr. Zeeshan Khatri Department of Textile Engineering, Mehran University of Engineering and Technology, Pakistan.	Dr. Ahmed Jalal Uddin Department of Yarn Engineering, Bangladesh University of Textiles.
Prof. Dr. Kaniz Farhana Department of Apparel Engineering, Bangladesh University of Textiles.	Prof. Dr. Mahbubul Bashar Department of Textile Engineeing, Mawlana Bhashani Science and Technology University, Bangladesh.
Prof. Dr. Nazmul Karim Department of Fashion and Textiles, University of Southampton, UK.	Prof. Dr. Masum Department of Textile Engineering Management,  Bangladesh University of Textiles.
Prof. Dr. Ferdous Sarwar Department of Industrial and Production Engineering, Bangladesh University of Engineering and  Technology.	Prof. Dr. Forkan Sarker Department of Textile Engineering,  Dhaka University of Engineering and Technology, Bangladesh.
Prof. Dr. Imranul Islam Fashion Institute of Technology, USA.	Dr. Mazed Islam Fashion and Textiles, University of Southampton, UK.
Dr. M. M Alamgir Sayeed Chief Scientific Officer, Bangladesh Jute Research Institute.	Dr. Saniyat Islam RMIT University, Australia.
Dr. Mahmud Akonda Research Fellow, The University of Manchester, UK.	Dr. Mahmud Hossain Technical University Dresden, Germany.
Chowdhury Jony Moin Department of Textile Engineering,  Ahsanullah University of Science and Technology, Bangladesh.	Prof. Dr. Khaled Mahmud Institute of Business Management,  University of Dhaka, Bangladesh

Industrial Editorial Board

Engr. Khen Maung  Director (Operations), NZ Textile Ltd. Bangladesh.	Engr. Santi Moy Datta Spinning Industry Consultant, Bangladesh.
Dr. Md. Fazley Elahi Head, Research and Development, DBL Group, Bangladesh.	Dr. Abu Shadate Faisal Mahamude DGM (Dyeing-Finishing), Cotton Club(BD) Ltd. Bangladesh.
Engr. Mohammed Harun CEO, SATIC Global Services Ltd. Bangladesh	Dr. Md. Mominul Motin Executive Director, Mondol Spinning Mills Ltd. Bangladesh.

Editorial Advisory Board

Prof. Mashud Ahmed  Department of Textile Engineering,  South East University, Bangladesh.	Prof. Dr. Mashiur Rahman Khan Department of Apparel Engineering,  Bangladesh University of Textiles.
Prof. Dr. Sheikh Mominul Alam Department of Machinery Design and Maintenance,  Bangladesh University of Textiles.	Prof. Dr. Ayub Nabi Khan BGMEA, University of Fashion and Technology, Bangladesh.
Prof. Dr. Md. Mahbubul Haque Department of Textile Engineering,  Daffodil International University, Bangladesh.	Prof. Dr. A.N.M Ahmed Ullah Department of Textile Engineering,  Southeast University, Bangladesh.
Prof. Dr. Saifur Rahman Department of Textile Engineering,  Daffodil International University, Bangladesh.	Prof. Dr. Hosne Ara Begum Department of Yarn Engineering,  Bangladesh University of Textiles.
Prof. Dr. Syed Atiqur Rahman Department of Textile Engineering,  Southeast University, Bangladesh.	Prof. Dr. Mohammad Abdul Jalil Department of Textile Engineering,  Khulna University of Engineering and Technology, Bangladesh.
Prof. Dr. Arun Kanti Guha Department of Textile Engineering,  Southeast University, Bangladesh.	Prof. Dr. Md. Abdus Shahid Department of Textile Engineering,  Dhaka University of Engineering and Technology, Bangladesh.
Prof. Dr. Lal Mohan Baral Department of Textile Engineering,  Ahsanullah University of Science and Technology, Bangladesh.	Prof. Dr. Muhammad Shahadat Hossain Siddique Department of Economics, University of Dhaka, Bangladesh